+

SolBank 2.0

Cost-effective and long service life Battery pack IP65 seal grade, avoid dust, moisture and water condensation Liquid cooling technology with cell temperatures being controlled within the optimal operating range Multi-stage thermal spread technology, effectively prevents battery heat spread and improves safety

  • Datasheet 1P
  • Datasheet 2P
  •  

     

    Parameter CSI-SolBank-S-3328-2h-NA CSI-SolBank-S-3328-4h-NA
    Battery Chemistry Lithium Iron Phosphate (LFP) Lithium Iron Phosphate (LFP)
    Pack Configuration
    1P69S (69 Cells)
    1P69S (69 Cells)
    Rack Configuration
    1P414S (6 Packs)
    1P414S (6 Packs)
    System Configuration
    8P414S (8 Racks)
    8P414S (8 Racks)
    DC Voltage (Nominal) 1324.8 V 1324.8 V
    DC Voltage Range 1159.2 V ~ 1490.4 V
    1159.2 V ~ 1490.4 V
    Rated DC Power 1545 kW
    780 kW
    Usable Energy Capacity (FAT) 3095 kWh 3130 kWh
    Max. Short Circuit Current 75 kA
    70 kA
    Charging/Discharging Mode 0.5 P / 0.5 P
    0.25 P / 0.25 P
    Duration @ Rated Power 2 hrs 4 hrs
    DC Round Trip Efficiency (RTE) 93%
    94%
    Aux Load (Standby/Peak)
    1.25 kVA / 30 kVA 1.25 kVA / 20 kVA
    Auxiliary Power Interface AC480 V / 60 Hz, 3P5W
    AC480 V / 60 Hz, 3P5W
    Thermal Management System Liquid cooling/heating for battery system, air cooling for electrical components and humidity control Liquid cooling/heating for battery system, air cooling for electrical components and humidity control
    Control Backup 2-hrs UPS for control system including BMS, installed in the container 2-hrs UPS for control system including BMS, installed in the container
    Operating Temperature (Ambient) -30 °C to 55 °C
    -30 °C to 55 °C
    Relative Humidity ≤95% (non-condensing) ≤95% (non-condensing)
    Communication Interface
    Ethernet, RS485, CAN
    Ethernet, RS485, CAN
    Communication Protocol Modbus TCP/IP, Modbus RTU, CAN 2.0
    Modbus TCP/IP, Modbus RTU, CAN 2.0
    Certifications
    UL1973, UL9540, UL9540A, UN38.3/UN3536
    UL1973, UL9540, UL9540A, UN38.3/UN3536
    Design Standards/Codes NFPA69, NFPA70, NFPA855, IEC62619
    NFPA69, NFPA70, NFPA855, IEC62619
    Enclosure
    20ft. high-cube container
    20ft. high-cube container
    Dimensions (L*W*H) 6058*2438*2896 mm (238.50*95.98*114.02 in) 6058*2438*2896 mm (238.50*95.98*114.02 in)
    Weight (Battery Included)
    30,200 kg (66,580 lbs)
    30,200 kg (66,580 lbs)
    Altitude ≤ 2000 m (derating between 2000 m and 4000 m) ≤ 2000 m (derating between 2000 m and 4000 m)
    Enclosure Ingress Rating IP55 / NEMA 3R IP55 / NEMA 3R
    Painting/Coating
    RAL9003
    RAL9003
    Seismic Parameter
    Zone 4
    Zone 4
    Noise Level ≤ 75 dB @1m distance ≤ 75 dB @1m distance
    Fire Detection and Alarm Fire alarm panel, heat and smoke detection, alarm bell and strobe with 24 hours UPS backup Fire alarm panel, heat and smoke detection, alarm bell and strobe with 24 hours UPS backup
    Explosion Prevention Combustible gas detection with active ventilation Combustible gas detection with active ventilation
    Fire Suppression Optional aerosol-based suppression system, dry pipe suppression system Optional aerosol-based suppression system, dry pipe suppression system
    Emergency Stop/Shut-off Local and remote Local and remote

     

Product Features

Back to list

Feedback

▪ The above information is only used for the purpose of demand collection and matching, JSolar promises to keep the information confidential and never use it in other commercial ways.

Submit

Contact Us

Submit
%{tishi_zhanwei}%

JSOLAR